Which screen protector and carrying case fit the ROG Ally X best?

Sooo, I went through this last year with the original Ally and basically just finished my own trial-and-error phase with the X. Finding an edge-to-edge protector that doesnt lift is actually a nightmare cuz of the slight bezel changes. I spent time comparing the Spigen Glas.tR EZ Fit for ROG Ally X against the amFilm OneTouch Tempered Glass for ROG Ally X. The Spigen alignment tool is literally a lifesaver for perfectionists, while the amFilm felt a bit more responsive to touch in my testing.

Regarding the extra depth, I looked at the JSAUX Carrying Case for ROG Ally X (BG0106) vs the Tomtoc Arccos-G42 Carry Bag. The JSAUX is a beast because it has specific cutouts for those larger grips, so the joysticks arent getting smashed when you zip it up. The Tomtoc is highkey better if you carry a massive brick like the Anker 737 Power Bank (PowerCore 24K), but it's less rigid. Hope that helps! 👍

In my experience, you're right to be cautious. I've tried many setups over the years, and the Ally X thickness is definitely a factor you cant ignore if you wanna keep those sticks safe.

Here's the breakdown of what actually fits:

- **Screen Protectors:** I'm currently using the dbrand Tempered Glass Screen Protector for ROG Ally X. It's a bit pricey, but the fit is literally perfect. Most generic ones leave a gap, but this one covers everything. Alternatively, the amFilm OneTouch Tempered Glass Screen Protector for ROG Ally is a solid budget pick, tho the alignment tool is slightly less precise iirc.

- **Carrying Cases:** The Official ASUS ROG Ally Premium Case is okay, but feels a bit flimsy. For your situation, I'd highkey suggest the Tomtoc FancyCase-G43 Carrying Case for ROG Ally or the Skull & Co. Maxcarry Case for ROG Ally. The Skull & Co one is especially good because it's got more vertical room, so it wont squish the joysticks on the thicker X model.

Ngl, stay away from those "universal" slim sleeves. They're way too tight for the X's beefier grips and might cause pressure issues... better safe than sorry, right? gl! 👍

Seconding the recommendation above! i'm still kinda figuring this out, but i think the extra depth is the real killer... if ur case is too tight, it squishes ur sticks which can cause drift, you know?

- amFilm OneTouch Tempered Glass for ROG Ally X: way cheaper than dbrand and fits edge-to-edge perfectly.
- JSAUX Carrying Case for ROG Ally X: way roomier for the X's thickness!

gl!!

In my experience, the X is 36.9mm thick cuz of that massive battery, so old cases put way too much pressure on the sticks... I've tested many setups over the years and safety is highkey the biggest issue. I would suggest the JSAUX 2-Pack Screen Protector for ROG Ally X for edge-to-edge coverage. For the case, the Skull & Co. EDC Case for ROG Ally X is great cuz it actually has the depth. gl!

Respectfully, I'd consider another option before dropping big money on those big name brands. I’m still kinda new to this whole handheld scene, but I’ve been doing some serious market research cuz I didn't want to overspend after that Ally X price tag lol. Honestly, I think the 'premium' screen protectors are a bit overblown. I've been super satisfied with the ivoler 3-Pack Tempered Glass Screen Protector for ROG Ally X. It’s way cheaper than the Spigen ones and fits edge-to-edge with no lifting issues at all.

For the case, most people suggest the slim ones, but I’d actually suggest a different approach. If ur worried about stick drift from pressure, the Butterfox Large Carrying Case for ROG Ally X is a beast. It’s definitely bulkier, but it has extra deep stick recesses which is a lifesaver for the X’s thickness.

- **ivoler:** Cheap, works well, easy install. Might not feel as 'fancy' but who cares?
- **Butterfox:** Loads of storage for chargers, zero stick pressure, but takes up more room in a backpack.

I’m really happy with this setup so far. GL with your choice!

Building on the earlier suggestion, unfortunately, most of these retail cases just arent hitting the mark for me lately. I spent some time digging through the technical schematics and CAD files for the X compared to the original, and that extra depth is legit causing issues with standard molded shells. I had issues with some of these compatible cases putting way too much pressure on the hall effect sensors, which is basically a disaster waiting to happen. If you want my honest take, just go the DIY route. You should check out some of the 3D printing repositories like Printables for custom backplate spacers or guard rails. Honestly, you can just get any rugged equipment case from a brand like Pelican or Apache and pluck the foam yourself to get a perfect fit. It is way more reliable than these mass-produced options that claim compatibility but feel super cramped. For the screen, just grab any tempered glass from a decent seller on AliExpress that mentions high light transmission specs. The big brand markup is basically just paying for a fancy plastic applicator you use once then toss... not really worth the premium in my book.