What is the best RA...
 
Notifications
Clear all

What is the best RAM to pair with an RTX 5090?

5 Posts
6 Users
0 Reactions
41 Views
0
Topic starter

Im finally putting together a 5090 build for VR and cant decide on the RAM. Torn between the G.Skill 8000 kit and the Corsair 7200 Titanium, leaning toward G.Skill but not sure if the stability is actually there.

Which one pairs better with that much GPU power?


5 Answers
12

I would suggest being very careful with the G.Skill Trident Z5 RGB 8000MT/s kit. Honestly, hitting those speeds stable is a total headache and might not even work... You should probably stick with the Corsair Dominator Titanium 7200MT/s CL34 for better reliability tho. Just make sure to verify it is on your board QVL list so you dont have crashes. Stability is kinda more important than a few extra frames.


10

Saw this thread this morning and had to jump in because I went through a similar headache last year. Honestly, I wasted weeks trying to get ultra-high speed kits to work on my rig. It was super disappointing because I expected plug-and-play, but instead, I got constant crashes and memory errors during long gaming sessions. Unfortunately, those 7200 and 8000 speeds are basically a lottery and most of us beginners just lose. I ended up swapping to something much more reliable that havent given me a single issue since. If you want my advice, go for something more conservative like:

  • TeamGroup T-Force Delta RGB DDR5 6000MT/s CL30
  • Kingston FURY Renegade DDR5 6400MT/s CL32 Both of those are way easier on the memory controller. Before you buy anything, definitely check the motherboard QVL list on the manufacturers site... if its not on there, dont risk it. Also, Buildzoid over at Actually Hardcore Overclocking has some great videos on why chasing these high frequencies is usually a trap for most users. Quick tip: Always stick to a 2-stick kit. Using 4 sticks of DDR5 is a recipe for instability at high speeds. Its just not worth the stress of a system that crashes while you're trying to enjoy VR. Better to lose a tiny bit of theoretical speed for a pc that actually works.


2

^ This. Also, unfortunately, 8000 kits are a letdown for stability. I had issues with voltage scaling on those. Grab Kingston Fury Renegade 6400MT/s CL32 to save money and frustration.


2

> leaning toward G.Skill but not sure if the stability is actually there I went through three different kits before settling on my current setup. Honestly, the ultra-high speed market is a total gamble right now. I found Patriot Viper Xtreme 5 RGB 32GB DDR5 7600MT/s to be way more consistent than the big names. It handles heavy VR loads without crashing. Definitely worth looking into if you want speed without the constant tweaking tho.


1

Helpful thread 👍


Share: